STEM Advocate Kari Lawler - Prints Astro PI in 3D Printz PLA Silver

Stem advocate Kari Lawler, has printed her AstroPI case for her Raspberry PI, using 3D Printz PLA 1.75mm Silver filament. 

Make sure you check out Kari's work on her twitter below and give her a follow!

Thrilled with my #AstroPI 🚀 @Raspberry_PI case. #3DPrinted using @3DPrintzLTD Silver PLA 10+hrs 0.2 20% on a #CR10 👽 https://t.co/SaOFyZyJo5 pic.twitter.com/vEs4rIBkT5

— Kari Lawler 🤖 (@KariLawler) October 2, 2017