Best Selling Products

Fits: Anycubic Photon M3 Premium Size: 244 x 150 mm Our new eXTReme line of Flexible Build System for Resin improves the already most powerful magn...

Build Plate Only - for the full kit you need FBSR Wham Bam Flexi Build Plates for Resin are made from high-quality spring steel that won't kink or ...

Please note: This is the build plate only. XTR plate for the Elegoo Saturn 2 8K, Saturn 8K, Saturn 3, and Saturn 3 Ultra. Wham Bam XTR Flexi Build ...

Fits: Creality LD-002R, Nova3D Elfin, Zortrax Inkspire Size: 138 x 78 mm The Flexible Build System contains: 1  WB Magnetic Base with 3M adhesive ...

To Mount the MUTANT to your Machine, you can purchase one of our two types of Universal X Gantry Plate Kits. This kit is for the standard V Slot 3 ...

Heatsink in black anodised aluminium to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment. Fits well...

Fits: UniFormation GKtwo Size: 229 x 129 Our new eXTReme line of Flexible Build System for Resin improves the already most powerful magnet availabl...

Micro Swiss NG™ REVO Direct Drive Extruder Micro Swiss NG REVO Extruder is the result of a collaboration between two leading 3D printing companies ...

This is Micro Swiss nozzle for Zortrax M200 All Metal Hotend ONLY.  It will ONLY fit our Zortrax M200 All Metal Hotend Kit. It is made from a 360 b...

The Copperhead™ Heat Sink is one section of the The Copperhead™ range and you will need to look at the full range here. PLEASE NOTE: The Copperhead...

HD PLA Red Lustre - 1KG - 1.75mm bought to you from 3D Printz.  Our HD PLA is a great quality filament. It gives a silky sheen or soft glow from re...

Size 330mm x 330mm / 13” x 13” Fits: Geeetech A30, TronXY X3S, TronXY X5S, TronXY X5SA Pro *May fit: Raise3d Pro2, Raise3d Pro2 Plus The Pre-Instal...

fits: Phrozen Sonic Mighty and Phrozen Sonic XL 4K 2022  Size: 200 x 125 mm The Flexible Build System contains: 1  WB Magnetic Base with 3M adhesi...

Replacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotend variants High-grade copper construction Plastic-repellent coatin...

Mounts directly to the top of The Mosquito Hotend™/Mosquito Magnum™ heat sink Simple to install and configure Machined aluminum component ...

Adapter with a integrated Push-fit connector that follows the dimensions for the “Groovemount” standard as used by E3D. CNC-machined in black anod...

Our White PLA 3D Filament is a high speed, quality PLA with a shiny finish and is incredibly easy to print with.  PLA is optimised for 3D Printing ...

 HD PLA colour Hide - 1KG - 1.75mm bought to you from 3D Printz.  Our HD PLA is a great quality filament. It comes with a lovely glossy finish and ...

Size 184mm x 184mm   *Fits: Bambu Lab A1 mini We start with our original 0.4mm high chromium spring steel Flexi Plates, powder paint them with Ulte...

 Size: 258 x 258 mm / 10.15" x 10.15" *Fits: Bambu Lab A1, X1, X1 Carbon (or X1C), X1E, P1P, and P1PS *May fit: TwoTrees SK1 (exact fit but without...

Size 430mm x 420mm *Fits: Creality CR-6 Max The Pre-Installed Flexible Build System includes: 1  Wham Bam Flexi Magnetic Base (high temp-resistant...

Mounting hardware for all Slice Engineering® hotend variants. Includes: Set (2x) of M2.5x10 socket head cap screws and washers for attaching...

Hex keys for Mosquito™ & Mosquito™ Magnum Contains 3 Allen key wrenches 2 mm 1.5 mm 1.3 mm

These special self-tapping steel screws have a cutting profile built into the thread angle so they require less driving torque and reduce the ...

700 mm, JST-XH6 6-pin connector to Dupont 4-pin connector. This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that ...

This mount for BMG extruder is CNC machined to precise tolerances in 3mm thick aluminium that assures a secure and stable mounting for the extrude...

Direct Drive Extruder & Hotend Bondtech Direct Drive System for Creality3D CR10S is an upgrade kit. It includes a high-performance Direct Driv...

To use with: Creality CR-10S Pro Creality CR-10S Pro V2 * Creality CR-10 Max * This set is necessary to install a DDX Upgrade Kit on the models m...

Fits: Phrozen Sonic Mighty 8k Size: 237 x 127 mm *Attention: The Mighty 8K build plates have a 1 mm variation on both X and Y and since we do not r...

The Mini Slap is a convenient way to add quick protection to your surfaces where and when you need it the most! Made of pure 100% first-grade silic...

Fits: XTR plate for the Elegoo Saturn 2 8K, Saturn 8K, Saturn 3, and Saturn 3 Ultra. Magnet only - does not include build plate Our XTR Magnetic Sh...

Wham Bam textured PC build surfaces are our high-performance, custom-blended Polycarbonate (or PC) build surface ideal for low-temperature filament...

Size 510mm x 510mm / 20” x 20” with Pre-Installed PEX Build Surface. *may fit: Cultivate3d the Beast V2 and Rat Rig V-Core 3 500 The Flexible Build...

Use a Micro Swiss All Metal hotend with the Bondtech DDX. Part made of PA12 (Nylon) with the SLS 3D printing process. Better surface finishing and...

To use with: Bondtech DDX Direct Drive eXtruder for Creality This set is necessary to install a Mosquito hotend in a DDX Upgrade Kit Upgrading...

High-quality screw-in compression fittings for closed coolant applications from the Eisele LIQUIDLINE series. Designed to be a perfect fi...

This extruder upgrade is for the Prusa MK2.5 or Prusa MK3 where you already have the Bondtech Drivegears. This kit contains the necessary parts t...

DDS Extension Cable This extension cable will allow you to use our Direct Drive System for Creality3D CR-10S on the S4 and S5 models. It will exten...