Find a bargain - clearance!

Thread insert for applications when a metal thread is needed with plastic parts. To attach the thread in plastic, a hole is required in the correc...

700 mm, JST-XH6 6-pin connector to Dupont 4-pin connector. This cable is by default wired for our 40 mm Geared Nema17 motor, please make sure that ...

Heatsink in black anodised aluminium to remove heat from desired component. Equipped with self-adhesive on the back for easy attachment. Fits well...

These special self-tapping steel screws have a cutting profile built into the thread angle so they require less driving torque and reduce the ...

WHAT MAGIGOO Flex was developed for professional use and can only be used with TPU (thermoplastic polyurethane), TPE (thermoplastic elastome...

1m long extension cable Molex Micro-Fit 3.0 connector (female end) JST RE-02 connector (male end) 

Mounting hardware for all Slice Engineering® hotend variants. Includes: Set (2x) of M2.5x10 socket head cap screws and washers for attaching...

Mech-3D is specified for 3D printers where friction is the enemy of quality. Lubricating the slides and bearings with Mech-3D will reduce friction...

Adapter with a integrated Push-fit connector that follows the dimensions for the “Groovemount” standard as used by E3D. CNC-machined in black anod...

To Mount the MUTANT to your Machine, you can purchase one of our two types of Universal X Gantry Plate Kits. This kit is for the standard V Slot 3 ...

Mounts directly to the top of The Mosquito Hotend™/Mosquito Magnum™ heat sink Simple to install and configure Machined aluminum component ...

This mount for BMG extruder is CNC machined to precise tolerances in 3mm thick aluminium that assures a secure and stable mounting for the extrude...

These are nozzles for High Flow applications They are manufactured by Bondtech in Swedenand will fit the following hotends/blocks: bq Hephestos H...

Our Blue PETG 3D Printing Filament has a lovely shine and is incredibly easy to print with.  PETG Filament has all the strengths that ABS has but h...

DDS Extension Cable This extension cable will allow you to use our Direct Drive System for Creality3D CR-10S on the S4 and S5 models. It will exten...

The Copperhead™ Heat Break is one section of the The Copperhead™ range and you will need to look at the full range here. PLEASE NOTE: The Coppe...

The Copperhead™ Hot Block is one section of the The Copperhead™ range and you will need to look at the full range here.  The Copperhead™ is a low-c...

This is an industrial heater, rated for high operating temperatures and designed for continuous operation in an enclosed heated chamber. State o...

Mounts directly to the top of the Mosquito™/Mosquito Magnum™ hotend heat sink Simple to install and configure Machined steel components ...

To use with: Creality CR-10S Pro Creality CR-10S Pro V2 * Creality CR-10 Max * This set is necessary to install a DDX Upgrade Kit on the models m...

Hard to the Core - Vanadium™ Nozzles are hardened and tempered to 65 Rockwell C all the way through the substrate, not just on the surface.  Craf...

PLA Carbon fibre is a high strength, tough PLA filament which looks fantastic as well as being easy to print. Diameter Tolerance  +/- 0.03mm D...

High-quality screw-in compression fittings for closed coolant applications from the Eisele LIQUIDLINE series. Designed to be a perfect fi...

Aircraft grade aluminum heat sink Fits Mosquito™ or Mosquito™ Magnum Mounting point for 25 mm cooling fan Contains built in anti-rotat...

Please note: This is the build plate only. This is the original XTR plate for the Elegoo Saturn 2 8K, Saturn 8K, Saturn 3, and Saturn 3 Ultra. It w...

Replacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotend variants High-grade copper construction Plastic-repellent coatin...

The Copperhead™ Heat Sink is one section of the The Copperhead™ range and you will need to look at the full range here. PLEASE NOTE: The Copperhead...

This is a return. It is unused and as new but with damaged packaging. Fits: Elegoo Saturn (V2) Size: 196 x 126 mm The Flexible Build System contain...

Kexcelled brings you the latest innovation in 3D Printing PETG with metal fill! This filament has actual Bronze metal inside the filament fused wit...

Kexcelled brings you the latest innovation in 3D Printing PETG with metal fill! This filament has actual Copper metal inside the filament fused wit...

The Bondtech BMG-M extruder combines high performance and resolution with low weight. Together with our proven and highly celebrated Dual-Drive te...

This extruder upgrade is for the Prusa MK2.5 or Prusa MK3 where you already have the Bondtech Drivegears. This kit contains the necessary parts t...

Behold the Mosquito® Liquid - it uses the same patented technology found in the standard, air-cooled Mosquito® hotend, but optimized for liqu...

The Bondtech BMG-X2 is the best and lightest performing extruder on the market that combines low weight with double high feeding capacity. Two Ver...

Direct Drive Extruder & Hotend Bondtech Direct Drive System for Creality3D CR10S is an upgrade kit. It includes a high-performance Direct Driv...