Magigoo - Glue Stick PRO Kit

by Magigoo
Save 50%
£69.99 (Inc VAT)
£34.99 (Inc VAT)


The Magigoo adhesives are designed for professional use to work exclusively with technical filaments. These professional grade adhesives ensure that the prints adhere firmly when the print bed is hot, and that the part is easy to remove after cooling.


  • MAGIGOO PA is designed for professional use to work exclusively with polyamide filaments. Designed and tested for use with various brands of PA (nylon) and fibre-reinforced filament.
  • MAGIGOO PC can only work with filaments of the polycarbonate type and fibre-reinforced variants.
  • MAGIGOO PP can only work with polypropylene filaments
  • MAGIGOO ABS is suitable for a variety of filaments, including most PLA, ABS, HIPS, PETG and TPU filament types.


  1. Shake the bottle.
  2. Apply to the desired area by pressing the tip of the adhesive on the bed (activate the inner valve) and spread as needed.
  3. Print according to the recommendations of the manufacturers of filaments / printers
  4. Allow to cool and remove. The print should jump off immediately
  5. Use a damp cloth (with water) to wipe off.

Use of this product with filaments other than those provided may cause excessive adhesion and damage to the build surface.

Signal word : Warning

Precautionary statements:

  • P264 - Wash thoroughly with plenty of water after use.
  • P280 - Wear protective gloves/protective clothing/eye protection/face protection.
  • P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
  • P337+P313 - If eye irritation persists: Get medical advice/attention.

Hazard statements:

  • H319 - Causes serious eye irritation